AOpen DE7200 Series Instruções de Operação descarregar pdf (Página 30)

INSTALLATION

3-10 01 Jan 14

DE-7200VFDCentrifuge

LOWER AND SECURE ROTATING ASSEMBLY

Note!

Do not discard the rubber strips between bearing pillow blocks, cover,

and base after removal. These strips must be re

-installed whenever the

machine is moved to prevent damage to the rotating asse

mbly bearings during

transit.

Following final positioning and leveling of the centrifuge, shipping blocks inserted between the

bearing pillow blocks and the base, as well as between the case and base, must be removed. The

shipping blocks prevent damage to the rotating assembly bearings during transit and should be

retained for future installation if the centrifuge is transported.

1. Remove all bolts securing top cover along both sides, but do not remove bolts on both ends of

cover.

2. Remove bolts securing bearing pillow blocks to base and bolts securing upper halves of pillow

blocks to lower halves (Figure 3-8).

Figure 3-8. Lowering and Securing Rotating Assembly

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 166 167

Sem comentários

AOpen DE7200 Series Instruções de Operação Página 30