AOpen DE7200 Series Instruções de Operação descarregar pdf (Página 160)

APPENDIX A - VFD CENTRIFUGE HMI SERVER SYSTEM

A-6 15 May 13

Appendix A-HMIServerSystem

Operation (Cont’d)

IP Address

If connecting to LAN 1, the static IP address of the PCs must be set to the following IP addresses:

IP Address

Subnet Mask

PC 1

100.100.10.201

255.255.255.0

PC 2

100.100.10.202

255.255.255.0

PC 3

100.100.10.203

255.255.255.0

In addition, note that no other component may be on the network with an address between

100.100.10.1 to 100.100.10.199, as these are reserved for the HMI Server system. Addresses

100.100.10.200 to 100.100.10.255 are reserved for the customer’s use.

The system may be operated from either the local HMI Server PC or a web-based program from

another PC. Refer to Installation for connection information on both systems. Operation from

either source is basically identical. When using the web-based program, a username and

password are required. Depending on which LAN port is to be connected to the HMI Server, start

the web-based program be entering the following information in the web browser:

For LAN port 1 - http://100.100.10.101/FTVP

For LAN port 2 - http://CentHMI0001/FTVP

Note! CentHMI0001 is identical to PC serial number, i.e., CentHMI0001,

CentHMI0002, CentHMI0003, etc.

Web-Based Program

To use the web-based program, enter the following username and password:

Username - readonly

Password - read

After entering the HMI Server program, the HOME screen will appear. Make desired selection

from Home screen to view a single centrifuge operation screen (Figure A-8) or view all centrifuge

operation screens side by side. The operator may then select additional option(s) from the

displayed screen. Figures A-7 through A-13 show the screens that are accessible through both

the web- and PC-based systems. Figure A-14 shows the DeskLock screen options.

1 2 ... 155 156 157 158 159 160 161 162 163 164 165 166 167

Sem comentários

AOpen DE7200 Series Instruções de Operação Página 160