AOpen FM56-SM Especificações descarregar pdf (Página 19)

4.7 Connecting Microphone And Speaker

You could either use a handset connected to the fax/modem, or connect a microphone and a

speaker for voice recording and playback, or connect cable of Jumper 1 with sound card in your

PC (optional, refer to sound card user's guide). Also, you may enable the ring wake up function

by connecting the cable of Jumper 5 to motherboard. (the function is optional, see the PC user's

manual for more detail)

NOTE:

Any commercially available microphone is usable.

For the speaker, any 8 ohm speaker rated around 1Watt can

be driven directly by the audio output. An amplifier is

required if you need a higher output volume.

1. Connect the microphone to the mini-phone jack marked MIC.

2. Connect the speaker to the mini-phone jack marked SPK.

NOTE:

Take care of the pin setting and cable setting direction (JP1 and JP2) for your Fax/Modem

card, Sound card and Motherboard.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 126 127

Sem comentários

AOpen FM56-SM Especificações Página 19