AOpen DXPS-U Especificações descarregar pdf (Página 60)



5. Ground yourself and install the new memory module:

a. Align the notch in the module edge connector with the tab in the connector slot.

b. Slide the module firmly into the slot at a 45-degree angle, and rotate the module down until it clicks into place. If you do not feel the click, remove

the module and reinstall it.



6. Replace the memory module cover.



7. Insert the battery into the battery bay, or connect the AC adapter to your computer and an electrical outlet.



8. Turn on the computer.

As the computer boots, it detects the additional memory and automatically updates the system configuration information. If prompted, press <F1> to continue.

Confirm the amount of memory installed in the computer:

l Windows® XP

¡ Right-click the My Computer icon on your desktop, then click Properties® General.

l Windows Vista™

¡ Click the Windows Vista Start button , right-click Computer, and then click Properties.

Subscriber Identity Module

Subscriber Identity Modules (SIM) identify users uniquely through an International Mobile Subscriber Identity.



memory module

securing clip

NOTICE: If you need to install memory modules in two connectors, install a memory module in the connector labeled "DIMMA" before you install a

module in the connector labeled "DIMMB." Insert memory modules at a 45-degree angle to avoid damaging the connector.

NOTE: If the memory module is not installed properly, the computer may not boot properly. No error message indicates this failure.

memory module

securing clip

NOTICE: If the cover is difficult to close, remove the module and reinstall it. Forcing the cover to close may damage your computer.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 105 106

Comentários a estes Manuais

Sem comentários

AOpen DXPS-U Especificações Página 60

Comentários a estes Manuais