AOpen AOI-702U Especificações descarregar pdf (Página 12)

Operations | Reference Manual

FocalSpot, Inc. | www.FocalSpot.com

Page | 12

4. Position the board at the center of the table and “stage” the PCB using the magnetic standoff posts.

The board should be well supported, stable and squarely aligned with respect to the table grid.

Best Practice: The FA Inspector is by factory calibrated at the 20mm stand-off height. Therefore,

when possible, always position the sample at the 20mm stand-off height to obtain the best focus,

lighting and scan detail.

Inspection Drawer and Table Assemblies

5. Verify that the board is loaded squarely (aligned exactly) with respect to the table grid. Use the

magnetic Alignment Guide to assist with this task.

6. Add stand-offs to support the PCB and hold it in place during inspection.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 164 165

Sem comentários

AOpen AOI-702U Especificações Página 12